ITEM |
UNIT |
VT-27G |
VT-27GL |
| CAPACITY | |||
| Swing over Z way cover | mm(inch) |
680 (26.8”) |
|
| Max. turning diameter | mm(inch) |
470 (18.5”) |
|
| Swing over cross slide | mm(inch) |
480 (18.9”) |
|
| Distance between centers | mm(inch) |
550 (21.7”) |
1050 (41.3”) |
| Max. turning length | mm(inch) |
550 (21.7”) |
1050 (41.3”) |
| Slideway slant angle | degree |
45 |
|
| TRAVEL | |||
| X-axis travel | mm(inch) |
240+40 (9.44”+1.57”) |
|
| Z-axis travel | mm(inch) |
590 (23.2”) |
1090(42.9”) |
| W-axis travel | mm(inch) |
--- |
1050(41.3”) |
| MAIN SPINDLE | |||
| Type of spindle nose | ISO |
A2-8 |
|
| Chuck diameter & type | mm(inch) |
305 (12”) |
|
| Main spindle bearing inner diamete | mm(inch) |
120 (4.7”) |
|
| Main through spindle hole diameter | mm(inch) |
87 (3.43”) |
|
| Main through bar capacity | mm(inch) |
77 (3.03”) |
|
| Main spindle drive motor(cont/30min) | KW(Hp) |
26 (35) / 37 (50 OPT) |
|
| Main spindle speed range | rpm |
1~600, 600~3500 |
|
| SUB SPINDLE (OPT) | |||
| Sub spindle nose | ISO |
A2-6 |
|
| Standard chuck size | mm(inch) |
203 (8”) |
|
| Sub-spindle drive motor(cont/30min) | KW(Hp) |
11 (15) |
|
| Sub-spindle speed range | rpm |
4000 |
|
| Sub-spindle through bar capacity | mm(inch) |
52 (2.04”) |
|
| TURRET | |||
| Number of tool stations | 10/12 |
||
| Turret type | STATIC |
||
| Turret indexing time | Sec |
(Hydraulic driven) 0.9 |
|
| Shank height of square tool | mm(inch) |
25 (0.98”) |
|
| Shank diameter for boring bar | mm(inch) |
63(2.48”)-10 tools / 50(1.97”)-12 tools |
|
| FEEDRATE | |||
| Rapid traverse rate x-axis | mm(in)/min |
20000 (787) |
|
| Rapid traverse rate z-axis | mm(in)/min |
24000 (944) |
|
| Rapid traverse rate w-axis | mm(in)/min |
24000 (944) |
|
| Ballscrew diameter of x-axis | mm |
32*P10 |
|
| Ballscrew diameter of z-axis | mm |
40*P10 |
|
| TAILSTOCK (WITHOUT SUB SPINDLE) | |||
| Tailstock travel | mm(inch) |
400 (15.7”) |
900 (35.4”) |
| Tailstock spindle diameter | mm(inch) |
110 (4.3”) |
|
| Tailstock spindle travel | mm(inch) |
100 (3.9”) |
|
| Taper hole of tailstock spindle | MT-5 |
||
| REMARKS | |||
| Coolant pump motor | KW(HP) |
0.6 (3/4) |
|
| Coolant tank capacity | L (gal) |
160 (42) |
|
| Floor space | mm |
3600*1750 (141.7”*69”) |
|
| Machine weight | kg |
7100 |
7700 |
ITEM |
UNIT |
27GL1500 |
27GL2000 |
| CAPACITY | |||
| Swing over Z way cover | mm(inch) |
680 (26.8”) |
|
| Max. turning diameter | mm(inch) |
470 (18.5”) |
|
| Swing over cross slide | mm(inch) |
480 (18.9”) |
|
| Distance between centers | mm(inch) |
1550 (61.0”) |
2050 (80.7”) |
| Max. turning length | mm(inch) |
1550 (61.0”) |
2050 (80.7”) |
| Slideway slant angle | degree |
45 |
|
| TRAVEL | |||
| X-axis travel | mm(inch) |
240+40 (9.44”+1.57”) |
|
| Z-axis travel | mm(inch) |
1590 (62.6”) |
2090 (82.3”) |
| W-axis travel | mm(inch) |
--- |
2050 (80.71”) |
| MAIN SPINDLE | |||
| Type of spindle nose | ISO |
A2-8 |
|
| Chuck diameter & type | mm(inch) |
305 (12”) |
|
| Main spindle bearing inner diamete | mm(inch) |
120 (4.7”) |
|
| Main through spindle hole diameter | mm(inch) |
87 (3.43”) |
|
| Main through bar capacity | mm(inch) |
77 (3.03”) |
|
| Main spindle drive motor(cont/30min) | KW(Hp) |
26 (35) / 37 (50 OPT) |
|
| Main spindle speed range | rpm |
1~600, 600~3500 |
|
| SUB SPINDLE (OPT) | |||
| Sub spindle nose | ISO |
A2-6 |
|
| Standard chuck size | mm(inch) |
203 (8”) |
|
| Sub-spindle drive motor(cont/30min) | KW(Hp) |
11 (15) |
|
| Sub-spindle speed range | rpm |
4000 |
|
| Sub-spindle through bar capacity | mm(inch) |
52 (2.04”) |
|
| TURRET | |||
| Number of tool stations | 12 |
||
| Turret type | LIVE |
||
| Turret indexing time | Sec |
(Servo driven) 0.15 |
|
| Shank height of square tool | mm(inch) |
25 (0.98”) |
|
| Shank diameter for boring bar | mm(inch) |
50 (1.97”) |
|
| Rotating tool speed | rpm |
4000 |
|
| Maximum power | kw(Hp) |
4.5 (6.0) |
|
| Torque | Nm (ft-lbf) |
22 (159) |
|
| Live tooling chuck type | VDI40 |
||
| FEEDRATE | |||
| Rapid traverse rate x-axis | mm(in)/min |
20000 (787) |
|
| Rapid traverse rate z-axis | mm(in)/min |
24000 (944) |
|
| Rapid traverse rate w-axis | mm(in)/min |
24000 (944) |
|
| Ballscrew diameter of x-axis | mm |
32*P10 |
|
| Ballscrew diameter of z-axis | mm |
40*P10 |
|
| TAILSTOCK (WITHOUT SUB SPINDLE) | |||
| Tailstock travel | mm(inch) |
1400 (55.1”) |
1900 (74.8”) |
| Tailstock spindle diameter | mm(inch) |
110 (4.3”) |
|
| Tailstock spindle travel | mm(inch) |
100 (3.9”) |
|
| Taper hole of tailstock spindle | MT-5 |
||
| REMARKS | |||
| Coolant pump motor | KW(HP) |
0.6 (3/4) |
|
| Coolant tank capacity | L (gal) |
160 (42) |
|
| Floor space | mm |
3600*1750 (141.7”*69”) |
|
| Machine weight | kg |
8300 |
8900 |